New Builds • Extensions • Alterations • Garages • Groundworks01472 235893 | a.w.construction@hotmail.co.uk
A.W.Construction - Building Contractors Call now

Emergency

Burst pipe or water coming through the ceiling: what to do

The first 30 minutes after a leak decide how much damage it does. Here's what to do, in order, and how to put things right afterwards.

5 min read · Updated November 2026

Water coming through a ceiling is one of the most stressful things that can happen in a house. Acting quickly in the first half hour can be the difference between a stained ceiling and a full strip-out.

Do this straight away

  1. Turn off the water at the stopcock. It's usually under the kitchen sink. In older terraces it can be under the stairs or in the front room floor near the front wall. Turn it clockwise. Find yours now, before you need it.
  2. Turn off the heating and hot water if the leak is on a heating pipe or near the boiler.
  3. Turn off electricity to affected areas. If water is near lights, sockets or the consumer unit, switch off at the consumer unit if you can reach it safely with dry hands. Never touch electrics while standing in water.
  4. Open taps to drain the system: cold taps first, then hot. This empties the pipes and reduces the amount of water escaping.
  5. Catch and contain water. Use buckets and towels, and move furniture, rugs and electronics.
  6. Watch the ceiling. If plasterboard is bulging with trapped water, keep everyone out of the room. A plumber or builder can release it in a controlled way, but don't stand under it.
  7. Call a plumber to fix the pipe, then call your insurer.

Frozen pipes

In a cold snap, a frozen pipe may not leak until it thaws. If a tap won't run, turn off the stopcock before thawing the pipe gently with a hairdryer or warm towels, never a naked flame, and check for splits.

After the leak is fixed

Even after the water stops, a building can stay wet for weeks. The repair needs to be done in the right order:

  • Drying out. Ceilings, walls and floors need to dry properly, sometimes with dehumidifiers, before they're repaired. Plastering over a wet wall just traps the moisture.
  • Checking the structure. Timber floor joists, ceiling joists and laths soaked for a long time need checking. In older houses, wet lath-and-plaster ceilings can sag and fall days later.
  • Replacing damaged materials. Plasterboard that has been saturated usually needs replacing rather than drying. Lime plaster on older walls often recovers if it's left to dry slowly.
  • Making good and decorating once moisture readings are back to normal.

We carry out the building side of water-damage repairs, from replacing ceilings to repairing floors and walls, and provide photos and quotes for your insurer.

Leaks you don't see

Not every leak is dramatic. A slow drip from a shower tray, a weeping radiator valve or a cracked waste pipe can rot floors for months. Signs include stains on ceilings below bathrooms, loose or springy floors, a musty smell, and your water meter moving when everything is off.

Common questions

Where is my stopcock?
Most often under the kitchen sink. In older houses it may be under the stairs, in a cupboard, or under a floorboard near the front wall. There's also an outside stop valve in the pavement, which belongs to Anglian Water.
Will my insurance cover a burst pipe?
Most buildings policies cover 'escape of water' damage. The cost of fixing the pipe itself may not be covered, and there's usually a larger excess for escape of water claims. Call your insurer for a claim reference.
How long does a ceiling take to dry out?
From a few days to several weeks, depending on how much water there was and what the ceiling is made of. Don't let anyone re-plaster or decorate until it's properly dry.

Talk to Tony about your job

Free, no-obligation quotes across Grimsby, Cleethorpes and North East Lincolnshire. We'll come out, look properly, and put the price in writing.

CallGet a quote