When a door is kicked in, a car hits a house, or a fire or leak leaves a building open, the first job is to make it safe and secure. Here's what to do and in what order.
After a break-in
- Don't go in if you think someone is still inside. Call 999.
- Report it to the police (999 if it's happening now, 101 otherwise) and get a crime reference number. Your insurer will need it.
- Photograph the damage before anything is repaired.
- Secure the property. Damaged doors and windows can be boarded with timber or OSB fixed from the inside where possible, so it can't simply be unscrewed from outside.
- Arrange the permanent repair: new door frames, glazing, locks to the standard your insurer requires, and making good the brickwork or plaster around them.
After a vehicle impact
Cars hitting garden walls, house corners and shop fronts is more common than people think, especially on corner plots and main roads.
- Keep everyone away from damaged brickwork. A wall that looks fine can be cracked right through and ready to fall.
- Get the driver's details and insurance, and a police reference if police attend.
- Get it propped or taken down. Damaged load-bearing walls need temporary support (props or "Acrows") until a permanent repair can be designed.
- Check for hidden damage: lintels, wall ties, foundations and drains near the impact point.
After a fire
Don't go back in until the fire service says it's safe. Fire can weaken roof timbers, floors and lintels, and smoke contamination spreads widely. Your insurer will normally send a loss adjuster and specialist cleaners. The building side, such as boarding up, making safe, strip-out and rebuilding, follows once the property has been assessed.
Empty and void properties
Landlords and executors often need empty properties secured quickly to meet insurance conditions: boarded windows, secured doors, water drained down in winter, and regular checks. We can board up and secure empty homes and commercial buildings, and carry out the repairs needed before they're re-let or sold.
